Hanh - 832.428.2431

     Return to Web Store

The Rube Goldberg Harness (Running a relay harness on a dual filament bulb, without cutting any wires)
(Will work on any plug-and-play kit. Handy if you want to run a relay harness on say, an H7 or an H1 kit.)
(A diagram is pictured at the bottom of this page)

1) Preparation


Recommended Tools:

  • Wrench or ratchet set
  • Philips screwdriver
  • An absolutely absurd requirement to make things needlessly complicated.

Optional Tools:

  • Additional zip ties
  • Double-sided tape

2) Installation

Step 1: Read the plug-and-play harness instructions.

Step 2: Read the relay harness instructions.

Step 3:

Stare at the really big picture at the bottom of this page.